Steel Plate Slitting Machine
Current position: Home
>
Product
STEEL PLATE SLITTING MACHINE, MODEL:A6x2400
(For light pole steel plate, taper plate cutting, with plate moving and dolly moving automation，with taper plate unloading and stacking )
The light pole plate slitting machine is base on the rolling shearing principle.
It is to cutting the light pole taper steel and get one side big one side small width steel plate.
There is a dolly in the front of the slitting unit. It is for control the taper cutting degree. Through changing the base position on dolly to change the taper degree.
Technical Parameter and Composed Devices
The light pole plate slitting machine is base on the rolling shearing principle.
It is to cutting the light pole taper steel and get one side big one side small width steel plate.
There is a dolly in the front of the slitting unit. It is for control the taper cutting degree. Through changing the base position on dolly to change the taper degree.
Technical Parameter and Composed Devices
Technical Parameter
1.Thickness of material：2~6mm, Q235, hot rolled mild steel,
2.Max.Width of steel plate：2000mm
3.Length range ： 2000～12000mm
4.Taper Slitting speed : 15 m/min.
5.Power of the main motor for slitting 7.5kw
6.Dolly moving speed 15m/min. ，adjustable
7.Slitting blade material : H13k
8.Slitting blade diameter : 280mm
9.Taper slitting Pinching roll diameter：280mm
10.Max. inner Width of slitting unit: 2400mm
1.Thickness of material：2~6mm, Q235, hot rolled mild steel,
2.Max.Width of steel plate：2000mm
3.Length range ： 2000～12000mm
4.Taper Slitting speed : 15 m/min.
5.Power of the main motor for slitting 7.5kw
6.Dolly moving speed 15m/min. ，adjustable
7.Slitting blade material : H13k
8.Slitting blade diameter : 280mm
9.Taper slitting Pinching roll diameter：280mm
10.Max. inner Width of slitting unit: 2400mm
Machine including:
1.Pole length supporting table + dolly ,with Automation device :
There is a dolly in the front of the slitting unit. It is for control the taper cutting degree. By change the position of the stopper on dolly to control the taper slitting rate.
The dolly with motorized driving, it can move to the right position on the table according the length of pole plate. And clamp the plate to get right plate moving direction.
The table roller with motorized driving, when the roller is dived by motor, the plate can move to the slitting unit and no need push the plate manually. Every roller with pneumatic clutch, it can be drove by motor and chain system, also can move the plate manually for adjusting the plate.
Both on dolly and in the front taper slitting unit, there are pneumatic devices for push plate to stop to get right taper cutting angle.
1.Pole length supporting table + dolly ,with Automation device :
There is a dolly in the front of the slitting unit. It is for control the taper cutting degree. By change the position of the stopper on dolly to control the taper slitting rate.
The dolly with motorized driving, it can move to the right position on the table according the length of pole plate. And clamp the plate to get right plate moving direction.
The table roller with motorized driving, when the roller is dived by motor, the plate can move to the slitting unit and no need push the plate manually. Every roller with pneumatic clutch, it can be drove by motor and chain system, also can move the plate manually for adjusting the plate.
Both on dolly and in the front taper slitting unit, there are pneumatic devices for push plate to stop to get right taper cutting angle.
3.Plate rising device.
This device includes two pneumatic cylinder, and it can be moved to different location according the plate length.
When the plate reach the front of slitting unit , plate will be stopped, this device will rise the plate , in order that the dolly can clamp and move the plate.
4.Taper slitting unit
The taper slitting machine is base on the rolling shearing principle to cut the steel sheet. And get trapezium plate with certain taper rate.
Including : two pairs pinching rollers, Motor, gear box, up and bottom pinching rollers, two blades,
Up and down two screw type rollers, with one pairs of slitting blade.
screw type rollers is easy for adjusting the cutting blade to any position for slitting any size of plate.
This device includes two pneumatic cylinder, and it can be moved to different location according the plate length.
When the plate reach the front of slitting unit , plate will be stopped, this device will rise the plate , in order that the dolly can clamp and move the plate.
4.Taper slitting unit
The taper slitting machine is base on the rolling shearing principle to cut the steel sheet. And get trapezium plate with certain taper rate.
Including : two pairs pinching rollers, Motor, gear box, up and bottom pinching rollers, two blades,
Up and down two screw type rollers, with one pairs of slitting blade.
screw type rollers is easy for adjusting the cutting blade to any position for slitting any size of plate.
5.Ball type support table for finished taper plate
6.Taper plate unloading and stacking automatic system
There are two pneumatic pinching rollers. The bottom pinching roller is with motorized driving, when the roller is dived by motor, the taper plate can move to far away from slitting unit. When the plate stopped moving, the up roller will rise and give the space for unloading the plate.
Under the table , there are pneumatic unloading device. They can rise from the middle of table, then two pieces taper plate will slide to both side stacking stand.
9. Electrical system：
Central control table.
For double edge slitting and taper slitting, also PLC, AC driver inverter have the feature of quick response and good activity，which can effectively control the dolly running speed.
6.Taper plate unloading and stacking automatic system
There are two pneumatic pinching rollers. The bottom pinching roller is with motorized driving, when the roller is dived by motor, the taper plate can move to far away from slitting unit. When the plate stopped moving, the up roller will rise and give the space for unloading the plate.
Under the table , there are pneumatic unloading device. They can rise from the middle of table, then two pieces taper plate will slide to both side stacking stand.
9. Electrical system：
Central control table.
For double edge slitting and taper slitting, also PLC, AC driver inverter have the feature of quick response and good activity，which can effectively control the dolly running speed.
10. Pneumatic system：
For dolly and table clutch, plate rising ,plate unloading device etc.
For dolly and table clutch, plate rising ,plate unloading device etc.
苏ICP备17067978号-1