CNC Light Pole Door Cutting Machine

Current position: Home > Product

electric cutter

CNC LIGHT POLE DOOR CUTTING MACHINE, MODEL : 350/2000

Application:

It is suitable for conical pole, round pole, octagonal light pole door CNC cutting, The cutting shape can be circle, square, rectangle, elliptic type etc and any which can be draw designed by computer. The cutting source is automatic plasma. So the cutting speed will be much fast, and cutting edge quality is better then flame cutting. Due to the use of the U.S.-made Hypertherm plasma power supply and torch, the cutting gap is relatively small, and the cut pieces are generally used as door covers. The pole material can be steel or Aluminum.

Main parameter:

No.	Item		Parameter
1	Pole material		Steel, Aluminum
2	Max. cutting length, X axis		2000mm (for once stroke cutting)
3	Rotation angle, A axis		Any angle 0~360 degree
4	Min pipe outer diameter		80
5	Max pipe outer diameter		350， (or according requirement)
6	Plasma source	Standard	Hypertherm Powermax 45 Suitable max. thickness:6mm (Made in USA)
		Option	Hypertherm Powermax 65 Suitable max. thickness:10mm (Made in USA)
7	Max thickness for making hole and quality cutting.		Base on Plasma source The up standard and option
8	Max plasma edge cutting thickness（manual holding way）		Base on Plasma source As 20mm for powermax65
9	Max.cutting speed		Base on Plasma source (for one normal light pole electrical door, the cutting time is about 30~40 seconds)
10	Main motor/Brand		Stepless motor/Chinese，
11	CNC system		Si Dafeng(SF-2100S)
12	Nesting SOFTWARE		SmartNest
13	Control axis		2 axis, X,A
14	CNC Plasma cutting torch		1 set
15	Arc voltage height controller		HEAVTH HP105
16	height DEVICE		Plasma Torch height moving device， 1set
17	Environmental temperature		0-45℃
18	Humidity		<90%, no condensation
19	Surroundings		Ventilation, no big shake，
20	Input voltage (Can be made according to buyer’s country voltage requirement.)		220V/1P/50HZ 380V/3P/50HZ 440V/3P/60HZ

Similar photos: 相关图片

Aluminum light Pole door cutting 铝路灯杆电门切割