CNC Pole Shut-Welding Machine
Current position: Home
>
Product
lamp post close straight seam welder
Lamp pole closing straight seam welding machine model: 340/7000
With submerged arc welding, carbon dioxide gas shielded welding two functions
Scope of use:suitable for longitudinal automatic welding of large length lamp poles
lamp post close welding machine
This welder is generally suitable for welding polygonal and circular tapered poles. The welder is an automatic welding line, the car is equipped with adjustable speed motor, can pull the lamp pole, from the small head to the big head movement. The hydraulic cylinder drives the pinch roller to tighten the lamp pole through the mechanical chain and sprocket, and welding is carried out at the same time.
The machine consists of the following parts:
1. Long table with tractable trolley rails
2. Trolley part for driving lamp post
3. Hydraulic clamping and welding parts (including 3 sets of pinch rollers, suitable for polygonal shapes such as 8-sided, 6-sided and round poles)
4. Submerged arc welding and CO2 gas shielded welding system with wire feeding system
5. flux recovery system
6. Rear support section
7. hydraulic system
Technical parameters:
1 | Diameter range of solderable poles | 60-340mm | |
2 | Length of solderable pole | 7000 mm | |
3 | trolley length | 1500 MM | |
4 |
Weldable pole thickness (no double-sided auxiliary cylinder) |
Light pole diameter: 60~340mm | 2.8~4mm |
Light pole diameter: 250~340mm | 2.8~5mm | ||
Light pole diameter: 300~340mm | 2.8~6mm | ||
Weldable pole thickness (with double-sided auxiliary cylinder) |
Light pole diameter: 60~340mm | 2.8~5mm | |
Light pole diameter: 250~340mm | 2.8~6.5mm | ||
Light pole diameter: 300~340mm | 2.8~8mm | ||
5 | Number of pressed feet | 8 sets (its advantages are to reduce the pressure on the surface of the multi-street lamp pole with pressed feet, reduce the impact of indentation, and beautiful) | |
6 | Oil pump motor power |
4 KW Single pump单泵 (If with option1, 4+2.5 KW double pump双泵 ) |
|
7 | Traction trolley motor power | 4 KW. frequency conversion, speed can be adjusted | |
8 | welder | 500A submerged arc welding and carbon dioxide gas shielded welding double function welding machine. | |
9 | Welding wire diameter | Depending on the thickness of the pole, different diameters of welding wire can be selected | |
10 | Working speed | 1~3m/min steplessly adjustable (Note: different thickness, different speed) | |
11 | Electrical components | Schneider French brand | |
12 | Main motor frequency converter | Schneider French brand | |
13 | Main motor brand | Siemens | |
14 | Welder brand | Southern, Chinese brand | |
15 | weight | 4500 kg | |
16 | Form factor | 17000x3000x4500 mm | |
Optional 1 | With double-sided auxiliary cylinder, the advantages are as follows: |
Especially suitable for small diameter thick plate street lamp poles, or high-strength steel plate street lamp poles This mechanism can give a lot of force to close the lamp pole, and weld it at the same time In addition, when the sheet of the street lamp pole is very thin, it can apply an outward reverse force to the press foot to avoid the press foot from pressing the surface of the lamp pole and leaving foot marks on the surface. The second particularly important advantage is that this system can be welded from start to finish, with almost no remaining unwelded length. This reduces the need for repair welding in the next process. |
|
Optional 2 | Trolley fast return mechanism | When the street lamp pole welding is completed, by pressing the button, the traction trolley can quickly return to the welding host, (Note: manual type machine, the towing trolley must be manually pushed back, very tired, but also time-consuming) | |
Optional 3 | Pneumatic clamping device, advantages |
With pneumatic clamping device, compared to manual clamping, simple and fast (Note: Thrust type pole closure welding machine, there is no clamping device, so the welding ground wire must be clamped to the top of each street lamp pole every time before welding.) Our tensile type close-up welding machine has a more stable welding travel speed, less welding bending after welding, no need to connect the welding ground wire, and easier operation. |





Optional 1 with double-sided auxiliary cylinder