CNC Light Pole Door Cutting Machine
Application:
It is applicable to the numerical control cutting of conical rods, round rods and octagonal aluminum rods. The cutting shapes can be round, square, rectangle, ellipse, etc. Any graphics that can be drawn by computer CAD can be cut through the attached special software.
The cutting source is automatic plasma, so the cutting speed will be fast, and the incision is smooth and round, and the incision quality is better than flame cutting.
Due to the use of the power supply and cutting gun of Haibao plasma made in the United States, the cutting gap is relatively small. If the switch is used to cut the lamp pole, the cut part is generally used as the door cover.
Main technical parameters:
|
No. |
Item |
Parameter |
|
|---|---|---|---|
|
1 |
Max. cutting length, X axis |
2000mm (for once stroke cutting) |
|
|
2 |
Rotation angle, A axis |
Any angle 0~360 degree |
|
|
3 |
Min pipe outer diameter |
80 |
|
|
4 |
Max pipe outer diameter |
350， (or according requirement) |
|
|
5 |
Plasma source |
Standard |
Hypertherm Powermax 45 Suitable max. thickness:6mm (Made in USA) |
|
Option |
Hypertherm Powermax 65 Suitable max. thickness:10mm (Made in USA) |
||
|
6 |
Max thickness for making hole and quality cutting. |
Base on Plasma source The up standard and option |
|
|
7 |
Max plasma edge cutting thickness（manual holding way） |
Base on Plasma source As 20mm for powermax65 |
|
|
8 |
Max.cutting speed |
Base on Plasma source (for one normal light pole electrical door, the cutting time is about 30~40 seconds) |
|
|
9 |
Main motor/Brand |
Stepless motor/Chinese |
|
|
10 |
CNC system |
Si Dafeng(SF-2100S) |
|
|
11 |
Nesting SOFTWARE |
SmartNest |
|
|
12 |
Control axis |
2 axis, X,A |
|
|
13 |
CNC Plasma cutting torch |
1 set |
|
|
14 |
Arc voltage height controller |
HEAVTH HP105 |
|
|
15 |
height DEVICE |
Plasma Torch height moving device， 1set |
|
|
16 |
Environmental temperature |
0-45℃ |
|
|
17 |
Humidity |
<90%, no condensation |
|
|
18 |
Surroundings |
Ventilation, no big shake， |
|
|
19 |
Input voltage (Can be made according to buyer’s country voltage requirement.) |
Single phase,220V, 50HZ Three phases, 380V, 50HZ |
|
苏ICP备17067978号-1